Technical Data

Physical Properties
Auto ignition Temperature 449.0°C 840°F
Boiling Point at 760 mm Hg 32.1°C 89.8°F
Critical Pressure, atmospheres / psi / bars 59.25 / 87 / 60
Critical Temperatures 214°C 417°F
Evaporation Rate (Ether = 1) 1.6
Flammable Limits
(LEL, vol %) 5.0 (1)
(UEL, vol %) 23.0
Flash Point -32°C -25.6°F
Freezing Point -100°C -148°F
Heat of Vaporization, btu/lb at normal boiling point 202.3
Molecular Weight 60.05
Refractive Index, n20D 1.3430
Solubility at 20°C / 68°F, wt % in water 33.0
Specific Gravity, 20 / 20°C 0.980
Specific Heat of Liquid , btu/lb/°F at 68°F 0.493
Surface Tension in air at 25°C / 77°F, dynes/cm 24.62
Vapor Density (air = 1) 2.07
Vapor Pressure, 20°C / 68°F, mm Hg 476.4
Viscosity at 25°C / 77°F, centipoise 0.355
Weight, pounds per gallon at 20°C / 68°F 8.17

1. "Fire Protection Guide on Hazardous Materials", National Fire Protection Association, Sixth Edition, 1975

*This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should therefore not be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.

Better Products. Better for the Environment.

www.foamsupplies.com   |   www.ecomatesystems.com

Foam Supplies, Inc.

FSI - Success through Innovation

Ecomate® Systems